Sweptline.ORG

most 300s run the bigger yoke just change them

Being that I currently live in 240sq ft. , I hope that you have left room for a add on. will add that all I have is a hot water heater,shower, sink, toilet and washer and dryer in so called bath room that takes about 72 sq ft. Add a small fridge a single bed a few feet of counter and sink, there isn...

Find a second pickup in 4X4

W605 is the part number they used on the last one I got.

Notice the DW00605 pp&g number on the ebay one

Don't forget about International 1 tons
axle has ujoints very heavy duty
but it's a dana 70

I think you have to put a shim behind the flywheel or it will rub on the bell housing.
some used a flexplate and cut it down for the shim holes are there that way

years ago there were tanks that replaced the running boards on some W-300s in the NW
full legnth about 4" deep at the step and 4 to 6"s wide going up to the bottom of the cab.

never found out who made them and didn't have money to try and get them

how about the hose under the cab, short one from the tank line to the line by the frame

That camper will be gone soon, thought you were going to come out in that 4 door,
October is getting closer

Hate it when the tires go flat on my engine hoist.
Now it will take a year to get around to fixing them,
no to get the wheels off then another year to fix the tires.
Guess I'm slowing down some

there are places to have them rebuilt.
can get new ones on EBay.
D100-200-300 are the same, seems there were two types used,
but with a slight move of the steering colume I think either will work


W300-D-400-500-600 and maybe bigger are the same

found a tire shop that will do mine, only 35 miles away.
Do em myself.
D-300 singles
W-300 duals
W-200 singles
D-500 duals
51 Krane-Kar and 51 Ken Worth

PwrWgnDrvr wrote:Definition of old: you're older than the sweptlines
Definition of really old: you have a kid older than the sweptlines

I fit the old part,
don't know about really old,
no one ever told me if I have a kid older than the sweptlines

one of these times when you have a front wheel off the ground grab it and try to push the top in and pull it out-- if it moves much you need to check the trunion bearings, also refered to as ball joints or king pins in some. (wanted to cover all the names) One of my books calls them the upper and lo...

check on the right side of the trans at the pto cover
should be a tag bolted on that gives information

mild RV type cam, some power, some fuel savings and less wear and tear on the engine

Decided it was time to look at the 95's trans/flex plate to see why it don't move, so slid a ball in the receiver on the front of it and put the tow bar on the 68 D-300, ya know, push the 95 backwards while going forewords with the 68. simple............. Hate new ones, can't tell if the E-Brake is ...

you can use a block to double you line and increase the pull power,
can't do that with a short line

may be able to finde help here For Sale: I have several 2 Speed Rear ends in trucks that are being parted out 1 they are in Dodge 500-600 series Trucks [1962-1974 ] and 1 out of a GMC 9500 /1965 truck /Allso front axals from these trucks and Have a cupple of Single Speeds Condition: Good Phone: 607-...

Is ESPO still around?

they had it all at one time

http://www.springsnthings.com/