Search found 343 matches
- Wed Dec 20, 2023 10:46 am
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Master Cylinder
- Replies: 2
- Views: 1216
Re: Master Cylinder
I don't have the Dodge number, but I have the number for the master from advance auto parts. CWH MCA 71258. I bought this in 2018. I had to go thru three different parts, returned the first two, finally this one was the right one. and they had it in stock. this one bolted right up, and is still work...
- Sat Nov 04, 2023 9:31 am
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Where to find flywheel inspection cover for 66 w200 with 4 speed
- Replies: 7
- Views: 2102
Re: Where to find flywheel inspection cover for 66 w200 with 4 speed
I got one from the local pull, and pay yard. the one I got was from a 70's dodge pickup. I think any Mopar 318 will fit. $3.00 bucks back then, early 2000.
- Mon Oct 30, 2023 8:09 am
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Shifter removal
- Replies: 3
- Views: 1143
Re: Shifter removal
all you have to do is push down on the shifter cover and twist counter clockwise. pretty strong spring under the cover, I used a pair of channel locks to get mine off. Ozzie.
- Fri Jul 21, 2023 7:51 am
- Forum: POWERWAGON 4X4 DISCUSSION
- Topic: 69 -71 Front fenders any diffrence?
- Replies: 4
- Views: 2396
Re: 69 -71 Front fenders any diffrence?
69's didn't have marker lights, they had reflectors.
- Tue Jun 28, 2022 11:25 am
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Bilstein Shocks
- Replies: 2
- Views: 705
Re: Bilstein Shocks
you are right, the only time my 69 W200 rides half way decent, is when I have a ton of rock in the bed, just the nature of the beast.
- Mon Sep 27, 2021 8:16 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Torque specs
- Replies: 8
- Views: 622
Re: Torque specs
as far as the bell bolts, I never torqued them, just tightened them. never had a problem with them coming apart.
- Mon Sep 27, 2021 8:13 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Turn signal
- Replies: 11
- Views: 812
Re: Turn signal
looking at the pins on the other end, they look correct for 69, and 71. 68's had bullet connectors. so it might work if it mounts alright in the top part of the column.
- Fri Sep 17, 2021 7:38 am
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Distributor cap during order 318
- Replies: 4
- Views: 418
Re: Distributor cap during order 318
if you removed the distributor, the bottom of the shaft has a tab that fits into a slot, so it will either be the same place, or 180 degrees off.
- Sun Sep 12, 2021 7:37 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Clutch wont return!
- Replies: 45
- Views: 2956
Re: Clutch wont return!
I have replaced the clutch several times, and I have always left the bell in place. as long as you prop up the rear of the engine, before you pull the trans to keep it level replacing the clutch will be easy.
- Mon Aug 02, 2021 11:30 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Grounding Issue for Lights or something else?
- Replies: 6
- Views: 391
Re: Grounding Issue for Lights or something else?
it sounds like when you pulled the wires, it pulled the pins , and lost a good connection. look where the wires come out of the column, and there is a connector the you can pull apart, and check the pins for a good connection.
- Sun Apr 04, 2021 6:58 am
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: Are reprouction cab / clearance lights available anywhere?
- Replies: 6
- Views: 514
Re: Are reprouction cab / clearance lights available anywhere?
i have three extra housing, with two or three lenses. I have a 69 W200 Powerwagon, these are the same kind if you are interested in them. they have some pitting, and I can't remember if all three have the amber lenses, I think they do.
- Tue Feb 16, 2021 8:16 am
- Forum: *BODY/TRIM/PAINT/OPTIONS HELP*
- Topic: Two little screws gone missing
- Replies: 2
- Views: 381
Re: Two little screws gone missing
I got some stainless ones at Fastenal.
- Mon Oct 12, 2020 5:16 pm
- Forum: *BODY/TRIM/PAINT/OPTIONS HELP*
- Topic: Gas pedal locating
- Replies: 2
- Views: 228
Re: Gas pedal locating
the gas pedal on 70 pickup was not mounted on the floor, it was mounted on the fire wall above the floor.
- Sun Sep 06, 2020 7:46 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Help Finding 1969 D100 Clutch Adjustment Rod
- Replies: 1
- Views: 199
Re: Help Finding 1969 D100 Clutch Adjustment Rod
I have the rod, and the adjusting nut. can't remember if the rubber spacer is with it. if you are interested in it, let me know, and I will check to see if the rubber is with it.
- Sat Jul 11, 2020 9:16 am
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Replacement Carb Options for 383
- Replies: 10
- Views: 715
Re: Replacement Carb Options for 383
Edelbrock 1405, easy to dial in, and pretty good mileage.
- Tue Jun 23, 2020 8:16 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Mini Starter Won't Engage.
- Replies: 6
- Views: 339
Re: Mini Starter Won't Engage.
sounds like the drive gear is not engaging the fly wheel. take it back to where you bought it.
- Thu May 28, 2020 2:02 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: rough and NO idle
- Replies: 7
- Views: 292
Re: rough and NO idle
wild guess here condenser? had a friend had a similar problem turned out to be the condenser. he had just tuned it up and replaced the cap, and rotor, but left the old condenser.
- Mon May 18, 2020 7:07 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Help finding a good replacement engine
- Replies: 10
- Views: 466
Re: Help finding a good replacement engine
whoever rebuilt the engine probably painted it black. I had a chevy engine rebuilt once, and they painted it black.
- Thu Apr 30, 2020 4:29 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Crankshaft damage
- Replies: 5
- Views: 336
Re: Crankshaft damage
the o ring might be from where the dip stick enters the oil pan? don't know if there is a o ring there, or the tube just slids in.
- Mon Oct 21, 2019 8:51 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: having trouble with my edelbrock carb.
- Replies: 8
- Views: 1233
Re: having trouble with my edelbrock carb.
there is a vacuum port on the back of the carb that is for a power brake booster. I have that blocked off. is that the one you are talking about, or is there another one? I have blocked all the ports that I had before the rebuild, and I have never had this kind of problem.I think that the guy I had ...