Sweptline.ORG

cptn60 (George) Bloomington, Illinois. Also known as Joke City, aka the land of a thousand stoplights, etc...

Scarebird also sell the machined hubs. It's advisable to buy new rotors, rebuilt calipers and new hoses locally. NAPA, A-zone, Advanced, RockAuto; whichever you have bet luck with. At work now; parts list is on my home computer. Maybe someone else can access that info, or I'll try to post again late...

Has anyone replaced the odd direct drive starter with a regular or mini-starter? I have one I bought for my Monaco , thought if I could get rid of the oddball and use something a bit more current that'd be the bomb. Application is a 66 D100 with A-318 and and a three speed(cast iron hydraulic bellho...

Not yet, John. Waiting for them to arrive and also for the ice to melt enough around the truck so I can take it to work and get it on a rack. May have to redrill the holes in the cross member, but if thats what it takes; so be it. I was able to buy new front engine insulators, that took a lot of vib...

I'm gonna try these. http://www.speedwaymotors.com/Square-Pa ... tabcontent
It's worth a shot, since the originals are junk and nos seems made of unobtanium.

Thanks guys, He was a good guy. I don't post much, so updates will be spotty at best. Sure are a LOT of super nice trucks and folks who drive em here!

Hi folks. Recently got a 1966 D100 given to me after a friend of mine passed away from cancer. His brother knew I liked the truck and we were all pretty close, so he just gave it to me. It isn't cherry by any means; but it sure has a special meaning for me at least. Plans are to repair the rust, som...

No, I didn't call anyone; I sell MoPar Parts for a living, just went on DealerConnect and looked. You're right- Mancini might have a set, though. They always gave good service, imo.

MountainMoparRobin wrote:part number says for trucks from 67-71 part number is P4529438 and is for 318-360 in Sweptlines. Here is the link http://www.mopar.com/tables/exhaust_3.htm

that # is NS1(discontinued). MoPar locator doesn't show any in stock at this time.

Buck; if you have access to a DCX(Chrysler-Jeep-Dodge) dealer here's a p/n-2224187. Don't know if it helps or not.

That oil filter study is 7 years old. There is a lot of good information in there but MoPar now sources their filters through Wix. HTH

Thanks, John

Getting ready to pull the engine and trans out of my 67 p200(Bread truck). I noticed there are 2 bolt patterns on this rascal . Could one pattern be a v8? Hydraulic clutch, 3spd 6cyl engine. Found a casting #2235714-1. Sorry camera is dead, so no pics. Thanks, George

Thanks Jim.

Hi everyone, would like to know if a 62 Swepty would have hydraulic or mechanical linkage for clutch operation. The Parts book on this site only specifies for 63-68. Thanks, George

Will a rear sump pan clear a stock steering & crossmember setup?