Sweptline.ORG

Hey all, Hoping someone can tell me where the "lower" contact point is for the black wire that is visible when removing the horn button? On my '69 D300, I can see the male spade terminal but no wire exists there. I've traced the ground wire from the horn, through the bulkhead connector, turns into a...

The "magnum" manifolds are for the later 360's. 92-93 year Dakotas had "the best" ones with a 2.125" outlet size. I will use the "magnum" manifold on the passenger side as originally intended. Today I stopped at the local wrecking yard and pulled manifolds from a '98 Cherokee (one was actually alrea...

NO, I DONT WANT TO DEAL WITH HEADERS. Pulling my hair out a bit. Planning to redo the exhaust on the D300. Found a set of the sought after Magnum manifolds that measure 2.125" outlet. Thought I was good until I went to fit the driver side. Knew it was questionable so I started with that and even wit...

Yes it sort of does! I'll see if I can make one fit. Good eye!

Talked with Mikes Carb parts. Excellent people but they do not have that part available.

May just bought a carb on ebay for parts and rob that part. Or...may try to 3D print one if the plastic will hold up to fuel.

Hey all, Rebuilt the carburetor on the 318 and noticed it was missing the "retainer" or "spring cup" at the top of the accelerator pump spring. The spring still registers in the bore on the underside of the top plate but I'd like to have the retainer. Seems I cant find this part anywhere. One site l...