Search found 9 matches
- Thu May 18, 2023 6:20 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: What would you do? Shift cable bolt stripped
- Replies: 9
- Views: 1804
What would you do? Shift cable bolt stripped
I replaced the shift cable on my 65 D200. The small bolt that holds the adjustment wheel to the transmission case will not go back in. The bolt had what looked like threads from the case in the bolt threads. Maybe a hela-coil? Anyway, what are my options? I have limited time and budget. I cant pull ...
- Sat Apr 29, 2023 6:54 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: replaced 65 in dash shift cable
- Replies: 0
- Views: 2222
replaced 65 in dash shift cable
The transmission was stuck in low gear because the cable is broke. I have a new cable from ebay. Worked out
- Sun Apr 02, 2023 10:39 am
- Forum: **GENERAL TECHNICAL HELP**
- Topic: In dash shifter issues
- Replies: 18
- Views: 3956
Re: In dash shifter issues
Great!jeffc57 wrote: ↑Sun Apr 02, 2023 6:27 ammight check with Wildcat Mopars in Sandy,Oregon, can look them up, closed Sunday and Monday https://www.wildcatmopars.com/
- Sun Apr 02, 2023 10:39 am
- Forum: **GENERAL TECHNICAL HELP**
- Topic: In dash shifter issues
- Replies: 18
- Views: 3956
- Sat Apr 01, 2023 2:10 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: In dash shifter issues
- Replies: 18
- Views: 3956
Re: In dash shifter issues
Greetings! I have a 65 D200 with in dash shifter. I could engaged PRND all within the P and N range. Seeking the gears.... Now, after I shifted the shifter up and down a few times Full range motion from the P setting to low and back, it will only now engage in Low 1. Any help to clean or adjust is ...
- Sat Apr 01, 2023 2:08 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: In dash shifter issues
- Replies: 18
- Views: 3956
Re: In dash shifter issues
In general I agree with PWD, However, since the cable enters the case you will not be able to see the cable at the trans end, you should be able to hear it shift inside the case with a automotive stethoscope, or by ear ( last year of this application, only year with 2 cables ). If it turns out that...
- Mon Mar 27, 2023 7:38 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: In dash shifter issues
- Replies: 18
- Views: 3956
Re: In dash shifter issues
I found 2 cables. No evidence of anything broke. Only Drive and somewhat of a Park works. Most of gear selector tension in felt from P to N. Then it feels loose as you lower the selector first and reveres use same band inside the trans, so may only be a "detente" adjustment were the cable enters the...
- Wed Mar 22, 2023 7:16 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: In dash shifter issues
- Replies: 18
- Views: 3956
Re: In dash shifter issues
It should be a 2 cable shifter. Is PARK working or is it in neutral at any point? IS it in gear only in first and reverse? or just 1st? Have you done a pan drop and filter change? Paperwork show the previous owner had the transmission serviced 6 years ago. I do not know what "service" was so I will...
- Tue Mar 21, 2023 7:25 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: In dash shifter issues
- Replies: 18
- Views: 3956
In dash shifter issues
Greetings! I have a 65 D200 with in dash shifter. I could engaged PRND all within the P and N range. Seeking the gears.... Now, after I shifted the shifter up and down a few times Full range motion from the P setting to low and back, it will only now engage in Low 1. Any help to clean or adjust is g...