Sweptline.ORG

Ok, right on! Thanks for confirming ya'll!

AK

We took off the molding and clips when stripping the truck awhile back and now want to fill in the holes where the clips were secured and get the truck ready for paint. Has anyone done this or filled these holes in somehow? I asked a body shop and they mentioned welding the holes. Any other methods ...

I am finishing up the wiring on my 1966 D100 and the blower motor has 4 wires (Green, Red, Yellow and Black). I've read some other articles where the wiring was different on these blower motors. Currently, the Green and Red Wire were fused together by previous owner and the yellow is a mystery. The ...

This is all really helpful! I'll give it a go this week and report back. I was using one of the terminals on the horn for a ground but sounds like that isn't required. Clears up my mistakes

I have been rewiring my 66 D100 with the Ron Francis wiring harness and it only supplies you with a power line going to the horn. I have a dual horn set up but don't know how it all fits together as Ron Francis doesn't give you that much information. I tried to look at the wire diagram but it doesn'...

Anyone know where to find a replacement bezel for the ignition switch?

I was able to buy a replacement ignition switch and key set but having a hard time with the mounting bezel for the dash.

1966 Dodge D100 318

Sweet! Yes, this is for the front wheels. Fingers crossed.

Thanks for the reply.

Hello - I'm new here but had a question about the wheel hubs on a 1966 Dodge D100 (318 5.2, 4 speed). One of the wheel hubs was replaced with a hub that isn't original but seemed to fit? How interchangeable are the truck wheel hubs and for what years? I'm trying to line up a new hub in a junk yard o...