Sweptline.ORG

Sorry guys forgot to mention I flipped the front leaf springs under the axle to lower the truck, which I now know causes the bump steer. I am now trying to figure out how I can correct that issue easily at home.

Hi guys I’m trying to pick your brains on how to easily fix the bump steer on a 1964 d200. I wanted to know if the were any aftermarket kits that can fix it if not what is the best route. There are so many conversations and suggestions but no definitive way or best practice to get it done. Please fe...

That tranny came with the truck when i bought and the engine when in the bed of the truck. They mate together perfectly but i am struggling to figure out the flywheel that should be used on it its killing me. One is two small and the other too big some one please help me :salut :salut :salut :salut

Here is a photo of the engine casting number 4104230-318-14 hopefully this will shed some light on the matter

The input shaft has 23 splines

Please see images attached hopefully it makes a lil more sense now guys. Fingers crossed

Sorry for the confusion guys I’m a novice obviously. The issue I’m having is when i try to mate the tranny and the engine together the flywheel is with too big and will not allow the tranny to slide up against the engine or when i use the other flywheel its too small for the starter to catch the tee...

I didn’t pick the bell housing its what the transmission was cast with its all one solid piece.

Just dawned on me the truck is a 1975 D100 and i have been searching for the flywheel for that year which is where i am probably going wrong. Can anyone help and let me know what year these trannys would be used between so i can find a flywheel that was used in those years instead. Or guide me to th...

I am Having a problem finding the right flywheel that works with this NP4530 transmission i am told its the same as a NP445 its just named differently and a 318 poly engine. The dilemma i am having is that i used the smaller size 10 1/2 inch clutch flywheel and its too small as it sits too far way f...

Can some one please explain what this is under the dash please. Trying to figure through this truck first time I have worked on one. It has K H on the knob and is able to be moved sideways. Probably a stupid question but hey we all got to learn somewhere. Thanks

Everything I have read states css has these tags on them and it has 2 faded stripes on the hood and roof. You may know better than I do. Please take a look and let me know what it all means.

That’s exactly what i have. Have you seen any replacements online and how much do they cost used and refurbished approx.

I Just acquired a 1964 dodge sweptline which i believe to be an unregistered CSS model. The engine will not turn and i am trying to remove it from the transmission. I would like to know what transmission came with this truck as it had a push button auto on the dash. I have looked online and cannot d...