Sweptline.ORG

I was wondering if the door hinges are interchangeable they look the exact same ,will the passenger side work on the Drivers side ? 67 d200

I am looking for an aftermarket possibly quick ratio bolt in manual steering box. Any suggestions would be great.

there is a Bolt that slips into the slot this is the front where the 2 trims connect

Txas2step wrote: ↑

Sat Apr 11, 2020 6:37 am

You install the clips in the molding 1st, in the same location as the holes in truck, insert molding in holes and gently tap in place.

greatly appreciated

Tex i greatly appreciate the help i definately was going in the wrong direction

on my 67 the head and the stem were white i just repainted it

?

I took the trim off by prying the clips from the side holes the trim and clips came off together this is the wide trim 2-7/8
When putting the side trim back on
do i push the clips in the holes then hook the top of the trim then snap the bottom in ?
if that is wrong id appreciate any help

I have the stem base for the small round mirrors for my 67 ,do I just drill a pilot hole and screw a metal screw to secure the mirror or am I missing something ?
which screw and size for this application ?

i n eed a 2 groove alternator pully that accepts a 1/2" V belt

I am going to replace the power brake booster on a 67 d200
I dont want one that i need to drill new holes can someone please direct me to the correct 1 to buy if they are still avaliable

I wish somebody would have responded i would like to know myself i am contemplating putting my 470 stroker with trick flow heads in mine

I ordered parts a month ago ,i have not heard a peep or seen any packages i was jusyt wondering if anybody else has ever used them ? I can call my bank to get a refund but i wanted the brake lines

Wildergarten wrote: ↑

Fri May 17, 2019 10:43 pm

Bigmcfry wrote: ↑

Fri May 17, 2019 4:59 pm

I took my drum off and the wear marks measured 2"x12 drum can someone please tell me where to find these,Thanks in advance .

Are you sure those aren't 12.125"?

yes they are so i ordered the 12.25 Thanks Wiltergarten

I found them -Parts Geek

I took my drum off and the wear marks measured 2"x12 drum can someone please tell me where to find these,Thanks in advance .

the converter in it now is no good ,is there an aftermarket converter you would suggest ?

Any suggestions for a decent torque converter 67 D200 stock built 383 engine

Can someone tell me where i can get rebuild brake parts or kit for 67 D200 power brakes
Thanks