Sweptline.ORG

78 d100 automatic. Can I replace rear main seal with engine and tranny in truck????????

Both of my wing window latches will not rotate. I have pulled the pin and tried to remove but I don't want to break them and they wont come off. Are the supposed to rotate around the stud or is the stud itself supposed to rotate. Any help would be appreciated. If it was another brand I could delete ...

Good Morning, I was wondering what automatic transmission swap works for the 318. I currently have the 4 speed with granny gear..... thanks

Trying to grasp 1/2 of the axle. Seems like the distance would equal the spring pack plus the whole axle width?i would measure from the top of the spring pack where it sits now to the bottom of the axle where it would sit after the flip???? Correct?

You said you did the drop axle and lowering springs? Where did you order the springs and how much of a drop were they? If you don’t mind me asking how much were they? I removed leafs like the forum suggested in front and rear, it doesn’t work. To get any drop in the rear you have to pull at least 3 ...

Thanks for all the input. I read all the forums and many said to remove leafs 2 and 4 and get a 3 inch drop with no issue, we’ll not true. I removed 2 and 5 to get less drop to be safe and leveled the back by removing 3 leafs out of a 5 pack and my 66 rides like crap. Floats around, body roll and do...

The hood on my 69 sticks up about an inch near the windshield? Is it caused by the hood hinges? Is there something that can be done to get hood down? A second question. Does anyone know of any generic baby moon hubcaps that will fit a dodge wheel? Thanks

Did you not have an issue with your oil pan hitting the steering bar that runs from hub to hub??

I keep hearing about bumpstop. Not sure what it is for sure except maybe if you hit a bump the oil pan hits the drag link??? I have my front end off and I am fixing to remove some leafs from the springs. Every one says you can get 3” drop with no issues??? I have 6.5 inches from Tire to fender, but ...