Search found 7 matches
- Sat Jun 30, 2018 8:39 am
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: another hor problem
- Replies: 5
- Views: 794
Re: another horn problem
ok sorry, i'm lost. here is the crux of the problem. i have a single wire from the horn button that looks like it goes to the roller switch which is ground. if that is correct, than how will the signal go from the switch to the horn? should there be 2 wires at the button? ground and something, anyth...
- Fri Jun 29, 2018 4:32 pm
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: another hor problem
- Replies: 5
- Views: 794
another hor problem
ok so i'm working on a 63 d 100 sweptline, 6 cyl, 4spd, 2 wd. i installed a new painless harness and all is working fine....but the horn. i didn't have any horn at all so i am using a cheap aftermarket until i can get to the junk yard. i want to use the original steering center wheel buttonbut not s...
- Fri Jun 02, 2017 4:32 pm
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: mini starter
- Replies: 6
- Views: 1057
mini starter
hi all, i'm working on a 1963 swept line 1/2 ton , 4 spd, 225 slant six. pretty much stock. decided to replace the starter with a high torque mini. i ordered one from db electric. the part, # 17466 (snd008), is the only one they sell and according to them should work in just about any morpar includi...
- Wed May 24, 2017 4:57 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: timing
- Replies: 6
- Views: 621
Re: timing
too kool.
- Mon May 22, 2017 8:55 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: timing
- Replies: 6
- Views: 621
Re: timing
hey guys, thanks for the great advice. turns out it was the distributor. when the motor was rebuilt, they installed the distributor a couple teeth off. pulled it out and rotated it and presto! a nice smooth running slant six. so anyone have a super six 2 barrel intake for sale? any thoughts on if it...
- Sun May 21, 2017 11:09 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: timing
- Replies: 6
- Views: 621
Re: timing
ok, thanks for all the info. i'm off to find a piston stop. i'll post my results.
- Sat May 20, 2017 3:54 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: timing
- Replies: 6
- Views: 621
timing
hi, i am a first time poster and a beginner as well. my truck is a 1963 1/2 ton slant six 4 spd, single barrel carb which has rebuild date stickers still on it. i was told by the previous owner that the motor was rebuilt. looking at it, if they didn't rebuild it, they had it out and they painted it....