Search found 572 matches
- Wed Jun 12, 2019 1:36 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Edelbrock 60779 heads
- Replies: 19
- Views: 1487
Re: Edelbrock 60779 heads
The round back alternator is a perfect fit.
- Tue Jun 11, 2019 10:17 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Edelbrock 60779 heads
- Replies: 19
- Views: 1487
Re: Edelbrock 60779 heads
The heads stick out about an inch more front and back than stock heads and, the square back sits right on top of the valve cover gasket surface.
- Mon Jun 10, 2019 8:19 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Edelbrock 60779 heads
- Replies: 19
- Views: 1487
Re: Edelbrock 60779 heads
As promised. I've gotten to the alternator install and it will not fit. I've ordered a PowerMaster 7018 alternator which is a dual field round back. The new nator boasts 95 amps in retro round back design. Pretty sure this will work but it will be a tight fit.
- Fri Jun 07, 2019 10:58 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Edelbrock 60779 heads
- Replies: 19
- Views: 1487
Re: Edelbrock 60779 heads
Like the intake, Edelbrock Torker 340" I had them laying around.
- Fri Jun 07, 2019 8:12 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Edelbrock 60779 heads
- Replies: 19
- Views: 1487
Re: Edelbrock 60779 heads
Still not in the truck yet but this is what it looks like.
- Tue Jun 04, 2019 3:36 pm
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: '69 D200 - Wheel fitment and IFS questions
- Replies: 1
- Views: 543
Re: '69 D200 - Wheel fitment and IFS questions
You'll be hard pressed to put a wheel of that size under the fender without scrubbing. I've got 15X9" on the rear with a 3.5 backspace. 275/60 15 tire. 11.00" of tread on the ground. The tire bulge clears the inner fender by.5 inch. You can definitely go bigger so long as you move the inner fender.
- Mon May 06, 2019 5:52 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 360 engine vibration
- Replies: 4
- Views: 418
Re: 360 engine vibration
Most obviously the 360 harmonic balancer is thicker and has cast iron weight showing between the balancer and pulley unlike the 318 which is thin and smooth. The 360 flex plate will have a visible rectangular weight for the external balance whereas the 318, being internally balanced, will have no we...
- Thu May 02, 2019 4:57 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Transmission coolant lines
- Replies: 3
- Views: 360
Re: Transmission coolant lines
The only difference that I can think of is that on your typical car the lines go all the way to the radiator. On older cars, a lot don't.
- Wed May 01, 2019 6:54 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Transmission coolant lines
- Replies: 3
- Views: 360
Re: Transmission coolant lines
Have you looked into the pre-made lines offered for cars?
- Thu Apr 25, 2019 11:15 am
- Forum: *BODY/TRIM/PAINT/OPTIONS HELP*
- Topic: paint color
- Replies: 6
- Views: 853
Re: paint color
The add is from April 1971 and lists four special colors. Medium Blue Metallic, Medium Green Metallic, Moss Green Metallic, and Tan Metallic.
- Sun Apr 21, 2019 9:23 am
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Engine paint ?
- Replies: 39
- Views: 5105
Re: Engine paint ?
Blue - (No Mopar number) (Color code never appeared in manuals) Slightly darker than the standard blue used on the 70's LA engines. Paint also turned Turquoise with heat. Even Galen Govier does not have a spec for mixing. This paint was used on a lot of 340' and other LA engines in late 69. Most res...
- Tue Apr 16, 2019 12:13 pm
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Engine paint ?
- Replies: 39
- Views: 5105
Re: Engine paint ?
This color debate is kind of funny. I found this and thought what the hey. Mopar Engine Colors Through The Years Below are the Mopar numbers for the various engine paints used by Chrysler from the 1940s. Black - Mopar P4120753 1981-up 2.2L engines 1983-up 318 and 360 engines All production Jeep engi...
- Tue Apr 09, 2019 6:33 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Fuel Venting - Leaking
- Replies: 12
- Views: 922
Re: Fuel Venting - Leaking
I wasn't willing to sacrifice the frame cross brace so I have started over with the 16-gallon tank. The 16-gallon tank doesn't require cutting anywhere and is almost a bolt in. You still have to make a frame to hold the tank but if you just wanted to slam it in you could probably mount it with Unist...
- Mon Apr 08, 2019 11:13 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Need a better fuel tank setup
- Replies: 8
- Views: 1061
Re: Need a better fuel tank setup
I ended up using the 64 - 68 Mustang fuel injection gas tank. Build a frame to fit the tank, bolt the tank to the frame and the assembly to the truck frame no other mods needed plus, if you decide later to move to fuel injection the tank made for it is in place. The tank is made by Tanks Inc and is ...
- Sat Apr 06, 2019 8:54 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Rear underbed gas tank conversion
- Replies: 81
- Views: 24977
Re: Rear underbed gas tank conversion
For anyone who is interested… The larger 22-gallon mustang gas tank will not fit in the same way without serious modification or removal of the frame cross brace. The 16-gallon tank is 7.5 " top to bottom and the 69-70 22 gallon tank is 9.75" top to bottom, two inches taller. The frame cross member ...
- Wed Apr 03, 2019 5:13 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Fuel Venting - Leaking
- Replies: 12
- Views: 922
Re: Fuel Venting - Leaking
If your truck doesn't have holes in the B pillar then it probably didn't come with EEC and not all did. There have been multiple threads in this forum regarding fuel leaks and several of them were solved by replacing the faulty vented gas cap.
- Wed Apr 03, 2019 5:03 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Fuel Venting - Leaking
- Replies: 12
- Views: 922
Re: Fuel Venting - Leaking
I have a 1971 D100. Tank leaked so I took it to a shop for repair and they destroyed it. Apparently, I live in the part of Ga where inbreeding isn't frowned upon. Point being I have all the EEC parts and no tank to attach them too. Currently in the process of installing a 68 Mustang 22 gallon fuel t...
- Tue Apr 02, 2019 1:51 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Fuel Venting - Leaking
- Replies: 12
- Views: 922
Re: Fuel Venting - Leaking
Do you have any of the old parts? The metal vent line that runs from the drivers' side vent to the passenger side, bolts to the cab just above the tank. The metal vent line that passes through the cab floor. The vapor canister that mounts inside the cab. The vent line that attaches to the frame and ...
- Mon Mar 11, 2019 3:43 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Surging stalling above 30mph
- Replies: 34
- Views: 2216
Re: Surging stalling above 30mph
The choke pull-off hose is right. The un-used line connects to the thermal sensor at the bottom of the air cleaner housing. The large line typically attaches to the PVC.
- Mon Mar 11, 2019 3:42 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: Surging stalling above 30mph
- Replies: 34
- Views: 2216
Re: Surging stalling above 30mph
The choke pull-off hose is right. The un-used line connects to the thermal sensor in the air cleaners snorkel. The large line typically attaches to the PVC.